XCMG XC958 loader—purchase recommendation
XCMG XC958 loader is suitable for working conditions in sand and gravel yards, coal yards, ports, logistics and other industries. It has three different working modes to meet the requirements of different working conditions and maximize benefits! In this article, let’s take a closer look at this loader.
XCMG XC958 loader uses Weichai’s latest WP1OH engine, which meets the National IV emission requirements. The engine has a rated power of 170kW, is powerful, and has the advantages of low fuel consumption and low emissions. It adopts XCMG’s self-made gearbox and uses a large-capacity, energy-saving twin-turbo torque converter. The gearbox adopts a dust-proof labyrinth respirator structure to effectively prevent external dust from contaminating the gearbox. The torque transmission capacity of the planetary gearbox and clutch has been increased by more than 10%, ensuring that the entire machine has better adaptability to heavy-load conditions. XCMG’s self-made reinforced drive axle has an optimized axle housing design, an enlarged housing cross-section, and a 10% increase in load-bearing capacity and bending resistance. The wheel edge adopts a four-planet wheel structure, which carries a uniform load, can withstand greater loads, and is more suitable for heavy-load conditions. The whole machine has strong power, quick response and high operating speed.
The front and rear frames of the XC958 loader adopt a large hinge and heavy-duty design, which disperses the force at the hinge; reduces the stress on the hinge pin and increases the service life of the bearing; increases the maintenance space at the hinge to improve the maintainability of the entire machine; reduces Stress concentration eliminates local weaknesses and ensures compliance under various harsh working conditions. Double tapered roller bearings are used at the hinge pin to increase the load-bearing capacity and improve driving stability; the rigidity of the front frame is enhanced to provide strength for the boom and cylinder. A solid mounting base; the working device adopts a Z-shaped inverted six-link structure with a single rocker arm, short tie rod, and horizontal boom cylinder; after CAE analysis, the hinge point design is optimized and has superior operating performance and operating efficiency; mainly The point adopts a two-stage dust-proof structure, which can effectively prevent dust and protect the grease from contamination, and provides reliable protection for the hinge pin and bushing; the pin lubrication method adopts oil injection from the flange, eliminating the pin lubricating oil hole. , the strength of the pin shaft is improved; the bucket teeth and main blade are made of super wear-resistant materials to increase the service life.
XCMG XC958’s high-performance shock-absorbing seat and adjustable steering column can meet the requirements of different drivers, embodying the humanized design concept. The joystick is within easy reach, making the entire machine comfortable and convenient to operate. The hood shape is integrated into the hardcore off-road design concept, with sharp lines and beautiful appearance. It adopts a large side door, an upward-turning design, and a large opening angle, which facilitates the inspection of the engine and radiator, making maintenance easy and simple.
The above is an introduction to the product functions of XCMG XC958 loader. If you need to purchase XCMG loaders or loader accessories, you can contact us at any time. If you are interested in second-hand loaders, you can also contact us or click on the link to browse our website (the products displayed on the website are not complete, please consult directly for more models).
