How to replace the excavator bucket?
How to replace the excavator bucket? The excavator bucket is one of the most frequently used parts of the excavator during operation. Similarly, the bucket is also the component that wears out the fastest, and the excavator bucket needs to be replaced frequently. Excavator bucket replacement is a technical job that requires the operator to pay attention to many things in order to complete the operation without damaging the machine and injuring personnel. What precautions should be taken when replacing the excavator bucket?
- When hitting the pin with a hammer, metal shavings may fly into the eyes, causing serious injury. When performing this type of operation, always wear goggles, a hard hat, a helmet, and other protective equipment. Protect your own personal safety before proceeding to the next step.
- When removing the bucket, place the bucket stably.
- If you hit the pin hard, the pin may fly out and injure surrounding workers.
- When disassembling the pin, pay special attention not to stand under the bucket, nor to put your feet or any part of your body under the bucket. When removing or installing the pin, be careful not to hurt your hands.
- When aligning the holes, do not put your fingers into the pin holes.
- Before changing the bucket, park the machine on a solid and flat ground. When performing linking work, for the sake of safety, both the oil pipeline personnel and the oil pipe personnel doing the linking work must understand each other’s signals and work carefully.
The above six points are the precautions for replacing the excavator bucket. Do not fail to comply with the above precautions in actual operation, and cause casualties, which is not worth the gain!
At CCMIE, you can not only buy high-quality excavator buckets, but also various models of XCMG excavators. Welcome new and old households to purchase.
