Why can’t a small loader step on the accelerator when it first starts?

Small loaders have played an important role in both engineering and agriculture and have become a powerful assistant in our work. The small loader works quickly, the functions of the control handle are clearly marked, and the operation is simple and easy to use. But many of our usual operating details are actually incorrect. Incorrect operations will not only affect the operating efficiency of the machine, but even shorten the service life of the machine! So let’s talk about the small details of these incorrect operations. Today let’s talk about it first: Why can’t a small loader step on the accelerator when it first starts?

Some operators want to start working quickly after the machine starts, so they step on the accelerator when the loader just starts, hoping to speed up the machine and enter the working state quickly. However, this is actually an incorrect operation method. When the loader engine is just started, the body temperature is low and the fluidity of the oil is poor, so the oil cannot be supplied to each lubrication point in a short period of time.

If the accelerator is hit hard at this time, the speed of the hole drilling machine will instantly increase, causing instantaneous dry friction, which will lead to severe wear and tear. The piston, connecting rod, and crankshaft will have violent impacts, accelerating the damage of the parts! Therefore, it is forbidden to slam the accelerator when the small loader is just started!

After reading today’s article, do you know why can’t a small loader step on the accelerator when it first starts? In addition, if you want to buy a small loader or loader accessories, you can contact us at any time.