30 ton rough terrain crane XCR30 for sale

30 ton rough terrain crane XCR30 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc.

Weight: 27334kg
Max lifting capacity: 30T
Engine rated power: 162/2000KW/r/min
Max. travel speed: 41km/h


Enquiry about 30 ton rough terrain crane XCR30 for sale

Description

Product Introduction

30 ton rough terrain crane XCR30 is widely used for lifting operations in oilfields, mines, road and bridge construction, etc.
G1 generation rough terrain crane XCR30 is designed with four innovative technologies integrated to create an ultrahigh performance ,green and energy saving efficient and intelligent lifting equipment.

Main Parameters

Item

Unit

Parameter

Max. rated lifting capacity

t

30

Max. Rated Lifting Moment

kN·m

989.8

Boom length

mm

35000

Jib length

mm

9000

Machine curb quality

kg

3950

Wheelbase

mm

3600

Engine rated power/speed

kW/(r/min)

162/2000

Max travel speed

km/h

41

Max. grade ability

%

78

Max. rotation speed

r/min

2.5

Remarks: This product is continuously improved with the progress of technology. The difference between the parameters and structural characteristics listed above is subject to the actual product.

Performance Characteristics

1. The total rated loads given in the rated load charts are the maximum lifting capacity when the crane is set up on firm and level ground, which includes the weight of the hook block and slings. The weight of above-mentioned devices should be deducted from the rated lifting load.

2. Before beginning lifting operation, the operator should know the weight of the load to be lifted and its working range, and then select proper working conditions. Never operate the crane beyond the limit shown in the chart. Use the lower value from the chart when the boom length or working radius is between the range of values.

3. Observe the boom angle limit. Never operate the crane with the boom angle beyond the recommended limit even if a load is not being carried. Otherwise, the crane will tip.

4. The boom should be extended according to the telescoping code shown by digits, which means the percentage of boom sections extended.

5. The working radius shown in the rated load charts is the radius when the load is lifted off the ground, and it is the actual value including loaded boom deflection. Take boom deflection into consideration before beginning a lifting operation.

6. A lifting operation is permissible only when the wind force is below grade 5 (instantaneous wind speed is 14.1 m/s, wind pressure is 125 N/m2).

Product Images

 

CASE RECOMMEND

 

Related products