GR5505 motor grader with blade for sale

GR5505 motor grader with blade adopts a three-stage variable power engine, which has high reliability and fuel economy, and low emission.

Model: GR5505
Engine: 2806D-E18TA
Working weight: 74000kg
Rated power/speed: 447/2100kW/rpm


Description

Product Introduction

GR5505 motor grader with blade adopts a three-stage variable power engine, which has high reliability and fuel economy, and low emission. Equipped with a hydraulic transmission with a lock-up clutch, saving energy by means of “automatic shifting”. At the same time, the gearbox has two working modes, “manual” and “automatic”, which can be switched. In manual mode, the change of vehicle speed is realized by manually operating the gearbox shift handle. In automatic mode, the gearbox will detect the engine speed and vehicle speed. and other information to achieve automatic shifting.

Main Parameters

 

Item

Unit

Parameter

Engine model

-

2806D-E18TA

Rated power/speed

kW/rpm

447/2100

Forward speed

km/h

4.6/5.9/8.7/11.7/17.7/25.1/32.2/42.7

Back speed

km/h

4.5/8.7/17.2/32.6

Minimum turning radius

m

12.5

Blade length x chord height

mm

7300×1025

Overall dimension

mm

16500×4350×4729

Total weight

kg

74000

Remarks: This product is continuously improved with the progress of technology. The difference between the parameters and structural characteristics listed above is subject to the actual product.

Performance Characteristics

● Equipped with double friction disc worm gearbox with overload protection, high modulus wear-resistant rotary gear ring, reinforced traction frame, heat treatment of guide rail, optimization of blade arc, integral angle positioner, safe and reliable.

● Electric control double handle operation. Change the traditional multi-handle control mode and reduce the driver’s control intensity by 70%.

● Load sensing hydraulic system. The operating force of the system is small, the hysteresis is small, the power loss is low, the efficiency is much higher than that of the conventional hydraulic system, and the synchronization of multi-way manipulation and compound action is realized.

● Double-circuit wet brake mine rear axle. The Italian OMCI rear axle specially developed for super-large mining graders has a built-in anti-skid differential. The balance box drive adopts the industry’s unique gear drive instead of the chain drive. The entire rear axle drive is equipped with forced cooling to ensure efficient and reliable braking.

● The temperature-controlled independent cooling system realizes that when the engine speed is at a low speed, the fan will increase to the maximum speed; when the low temperature starts cold, the solenoid valve on the fan drive valve group can be opened to adjust the control pressure of the plunger pump to realize the control of the fan speed, to achieve the purpose of energy-saving and consumption reduction.

● Pressurized cab technology. Cab air remains clean and positive for up to 48 hours.

● The engine and gearbox are equipped with an automatic fault diagnosis function, which can be monitored in real-time through the GPS platform, and the historical records can be saved to realize remote control.

* All relevant spare parts for the GR5505 motor grader are available.

Product Images

 

CASE RECOMMEND