XGH5180ZXXD6 detachable container garbage truck
The XGH5180ZXXD6 detachable container garbage truck is suitable for airtight transfer of domestic garbage after compression and volume reduction in garbage transfer station.
Model: XGH5180ZXXD6
Rated lift capacity of hook hook: 14000kg
Pick-up time: ≤60s
Unloading time: ≤60s
Enquiry about XGH5180ZXXD6 detachable container garbage truck
Description
Product Introduction
XGH5180ZXXD6 is a detachable container garbage truck that integrates garbage collection and transportation functions. One vehicle can be equipped with multiple boxes, and the utilization rate of a single vehicle is high. It is suitable for the airtight transfer of the domestic waste compressed and reduced in the waste transfer station to the landfill or the transfer of bulk waste.
Main Parameters
Item | Unit | Parameter |
Rated lift capacity of hook hook | kg | 14000 |
Pick-up time | s | ≤60 |
Unloading time | s | ≤60 |
Tilt angle | ° | 50 |
Hook height | mm | 1570 |
Rear Roller Entry Width | mm | 1070 |
Remarks: This product is continuously improved with the progress of technology. The difference between the parameters and structural characteristics listed above is subject to the actual product.
Performance Characteristics
1. The dual operating system redundancy design of wireless remote control + cab operation panel is adopted to realize two operation modes inside and outside the cab.
2. The first domestically created auxiliary hook function based on position memory. The controller and angle sensor are used to control the lifting arm to lift to the set hook height. At the same time, when adjusting the lifting angle, it can cooperate with a customized proportional control valve to reduce the maximum height. Arm running speed, improve adjustment efficiency.
3. Equipped with a proportional control system, so that the hook hand can operate in small steps when aligning the hook, improving the accuracy and fineness of the action, and making it convenient for the operator to quickly hook the hook. When the oil cylinder runs to the end, the proportional speed is adjusted to realize the buffering at the end of the upper car and the lower car, and reduce the impact and noise of structural parts caused by excessive speed.
4. A new type of unloading protection mechanism is installed to ensure that the turning frame will not rotate relative to the sub-frame when the vehicle is unloading, thereby improving the safety and reliability during use.
5. One car can be equipped with multiple boxes to improve the utilization rate of the vehicle and reduce the waste of no-load on the return journey. The whole action process adopts the logic control loop of advanced concept, and a button can realize the desired action.
6. Equipped with an integrated rear support device, which saves time and effort during assembly, takes up less space on the chassis, improves the applicability of the vehicle, and is convenient for maintenance. When the rear support device is stowed, the height from the ground can reach more than 360mm, which is not troubled by the limit steps of the unloading site, and the performance is industry-leading.
- All the spare parts of XGH5180ZXXD6 detachable container garbage truck are available.
Product Images
CASE RECOMMEND
