XM503K mini milling machine for sale

The XM503K mini milling machine is a small asphalt road maintenance and construction machine that is primarily used for municipal road maintenance…

Model: XM503K
Engine brand: Shangchai
Working weight: 7950kg
Rated power/speed: 103/2200kW/rpm


Description

Product Introduction

The XM503K mini milling machine is a small asphalt road maintenance and construction machine that is primarily used for municipal road maintenance and as an auxiliary construction tool for larger milling machines.
It can dig and renovate asphalt concrete pavements in limited areas, such as highways, downtown roads, airports, cargo yards, and parking lots.

Main Parameters

Item

Unit

Parameter

Engine brand

-

Shangchai

Rated power/speed

kW/rpm

103/2200

Working weight

kg

7950

Maximum milling width

mm

500

Maximum milling depth

mm

210

Number of tools

-

60

Milling wheel diameter

(with tool)

mm

750

Remarks: This product is continuously improved with the progress of technology. The difference between the parameters and structural characteristics listed above is subject to the actual product.

Performance Characteristics

1. Power system: The advanced, mature and reliable Shangchai new-generation four-valve 140-horsepower SC4H water-cooled engine is adopted, with strong power and low fuel rate.

2. Walking system: tire type, four-wheel all-wheel drive, using the hydraulic and mechanical driving mode, can carry out stepless speed change and has one driving gear and three working gears. The rear wheels are independent suspension support wheels. The right rear wheel can be swung inward for easy welt milling.

3. Steering system: full hydraulic front axle steering, with steering angle indication function; small steering radius, and can be milled along with the caisson cover.

4. Milling system: It adopts hydraulic and mechanical transmission mode, and the milling is reliable and powerful; the imported cutter head ensures the service life of the cutter; it has the function of slow rotation of the rotor, which is convenient for changing the cutter.

5. Milling depth control: The left and right rear outriggers can be adjusted up and down to allow wedge milling, with a two-speed depth control function; a depth indicator is installed on the rear outriggers to display the milling depth. The equipment can be equipped with an optional automatic leveling system.

6. Conveying system: It has a fully enclosed conveying belt, the maximum discharge height is 3.8 meters, and it has the ability to swing around 30 degrees and the function of adjusting the discharge height.

* All relevant spare parts for the XM503K mini milling machine are available.

Product Images

 

CASE RECOMMEND